24H Mold Inspection
Plymouth24/7 EMERGENCY(734) 987-6441
HomeOur ServicesLeak & Moisture Detection
our services

Leak & Moisture Detection

Hidden moisture is the root cause of most mold problems. We locate it precisely—without tearing into walls—so you can fix the source, not just the symptoms.

About

Why Moisture Detection Comes First

Mold needs moisture to grow, and moisture hides. We use non-destructive instruments to map water through walls, floors, and ceilings—and thermal cameras to see temperature anomalies that indicate active leaks or condensation—giving you a precise location before any repair work begins.

Moisture detection helps you:

  • —Pinpoint the exact source of a leak before demolition
  • —Map moisture spread behind walls and under flooring
  • —Identify condensation-prone areas before mold appears
  • —Confirm repairs were effective after water damage is addressed
Why Moisture Detection Comes First

Methodology

How We Detect Moisture

Non-destructive tools that locate water without cutting into your property.

We measure the moisture content of walls, floors, and ceilings using both pin-based and non-invasive pinless meters—mapping the full extent of saturation without surface damage.

Best for:

— Drywall, wood framing, and subfloor assessment
— Mapping moisture spread after a water event
— Establishing baseline readings for monitoring

Our thermal cameras detect temperature differentials across surfaces. Water-loaded materials hold heat differently than dry materials, making leaks and saturated zones visible behind finished walls.

Best for:

— Finding active leaks behind drywall without cutting
— Locating plumbing or roof leaks not yet surface-visible
— Identifying condensation zones that feed mold

Every finding is documented with photos, moisture readings, and thermal images. You receive a clear report so contractors, insurers, or property managers can act immediately.

Report includes:

— Moisture readings mapped by room and surface
— Thermal images with annotated anomaly locations
— Probable source identification and next steps

Mold inspector at work

Checklist

When Do You Need Moisture Detection?

Moisture detection is the right first step if:

  • —You smell mold or dampness but can't find the source
  • —You've had a plumbing leak, roof leak, or flood
  • —You're buying a property and want to verify no hidden moisture
  • —You had water damage and want to confirm the area is fully dry
  • —Recurring mold keeps coming back after surface cleaning

Moisture detection is often the fastest and most cost-effective way to scope a mold problem before committing to testing or remediation.

Detection Services

Our Detection Methods

Two complementary tools that together give a complete picture of moisture conditions in any building.

1Thermal Imaging

Infrared cameras reveal temperature anomalies that indicate hidden leaks, condensation zones, and moisture paths behind finished surfaces.

2Moisture Detection

Pin and pinless meters precisely measure moisture content in walls, floors, and ceilings—mapping the full extent of saturation without destructive investigation.

Mold inspection Plymouth FAQ

Call For An Inspection
Older buildings near Kellogg Park carry conditions newer construction does not. Stone and brick foundation walls were built without waterproofing membranes and let ground moisture through in spring. Original plumbing and radiator lines develop slow leaks inside walls. Chimneys and roofs have been repaired many times, and each repair adds a seam where water can enter. In masonry storefronts, failing mortar can move moisture into the apartments above. An inspection concentrates on the foundation, basement, chimney, attic, and plumbing walls, using thermal imaging and moisture meters.
Clay soil holds moisture far longer than sandy soil, so ground that saturates during the March thaw can press against foundation walls into May or June. Freeze-thaw cycling opens small cracks each winter, and water that enters in fall expands as it freezes. The thaw is when it finds the crack. That is why many basement moisture problems start or worsen in spring, and why a post-thaw inspection often finds conditions that a summer visit would miss.
The method is the same. What differs is the housing. The city's older, denser blocks near the downtown tend to have stone foundations, basements, and original systems, while the township has more postwar suburban housing with slab or crawl-space foundations. The inspection is scoped to the specific home's age, foundation type, and systems, not to the municipality. Both are served from the same team.
Postwar housing in this area is now 50 to 70 years old and its original systems are failing together. Galvanized and early copper plumbing leaks at fittings behind walls, aluminum windows have lost their seals and condense in winter, bath fans often vent into the attic, and foundations have cycled through decades of freeze and thaw. Thermal imaging and moisture meters find hidden moisture in walls and attics that a visual check misses.
Yes, especially for historic downtown homes and for postwar houses with basements. The inspection covers thermal imaging for behind-wall moisture, basement and crawl-space readings, attic ventilation, and air or surface sampling where growth is suspected. A standard home inspection often notes a stain or smell and recommends a specialist. Independent documentation before closing protects you from inheriting a slow problem.
Our Plymouth, Michigan team covers both the city of Plymouth and Plymouth Township, with same-day and next-day appointments and 24/7 emergency response. Canton and Livonia each have their own 24H Mold Inspection page with a local team. If your property is in either city, start with that page. If you are not sure which page fits your address, call the number on this page and we will point you to the right team.
The inspection is the diagnosis. We map moisture with thermal imaging and meters, identify the source, and send samples to an accredited lab, then deliver a written report with the extent of growth, the cause, and a defined scope. The cleanup is done by a separate remediation contractor, because we perform inspection and testing only. Once the work is done, we can return for independent post-remediation verification.

Contact

Book your Plymouth mold inspection today

Tell us what's going on and we'll respond the same day

Location

24H Mold Inspection of Plymouth

Hours

  • MondayOpen 24 hours
  • TuesdayOpen 24 hours
  • WednesdayOpen 24 hours
  • ThursdayOpen 24 hours
  • Friday6 AM – 6 PM
  • SaturdayClosed
  • SundayOpen 24 hours

Service area neighborhoods

  • Plymouth
  • Plymouth Township
  • Canton Township (adjacent)
  • Northville (adjacent)
  • Livonia (adjacent)
  • Westland (adjacent)
Call For Service(734) 987-6441