24H Mold Inspection
Plymouth24/7 EMERGENCY(734) 987-6441
HomeOur ServicesMold TestingAir Testing
Mold Testing

Air Testing

Mold air testing detects airborne spores and assesses indoor air quality, even in spaces where no visible contamination has shown up yet.

Overview

Why mold air testing matters

Most mold is invisible. Spores float undetected through ducts and doorways, spreading from room to room with the air itself. Air testing reveals the species and concentration of what's airborne, even when no visible growth is found on any surface.

Mold air testing detects:

  • —Invisible mold spores circulating through the air
  • —Differences in spore levels from one room to the next
  • —Contamination inside HVAC systems and hard-to-reach areas
  • —Early warning signs in rooms that appear unaffected
Why mold air testing matters
Mold inspector at work

Benefits

What you get from air testing

Understand the air quality and find what your eyes can't

  • —Non-invasive: No drilling, no surface damage, no demolition needed.
  • —Early detection: Catch contamination before it spreads or symptoms start.
  • —Data-driven: Measure and compare spore counts room by room with lab-verified results.
  • —Defensible documentation: State-certified lab results that hold up for insurance and real estate use.

About

How mold air testing works

Our certified mold inspectors use calibrated sampling pumps to draw air through a spore trap cassette, capturing airborne mold spores. The lab identifies the mold species under a microscope, including any HVAC contamination if the system is implicated.

Our process includes:

  • —Targeted sampling in problem areas and comparison sampling outdoors
  • —Spore traps or impactor cassettes calibrated for accurate collection
  • —Lab-verified results identifying species and spore counts
  • —A written mold inspection report with the numbers and next steps
How mold air testing works

Mold inspection Plymouth FAQ

Call For An Inspection
Older buildings near Kellogg Park carry conditions newer construction does not. Stone and brick foundation walls were built without waterproofing membranes and let ground moisture through in spring. Original plumbing and radiator lines develop slow leaks inside walls. Chimneys and roofs have been repaired many times, and each repair adds a seam where water can enter. In masonry storefronts, failing mortar can move moisture into the apartments above. An inspection concentrates on the foundation, basement, chimney, attic, and plumbing walls, using thermal imaging and moisture meters.
Clay soil holds moisture far longer than sandy soil, so ground that saturates during the March thaw can press against foundation walls into May or June. Freeze-thaw cycling opens small cracks each winter, and water that enters in fall expands as it freezes. The thaw is when it finds the crack. That is why many basement moisture problems start or worsen in spring, and why a post-thaw inspection often finds conditions that a summer visit would miss.
The method is the same. What differs is the housing. The city's older, denser blocks near the downtown tend to have stone foundations, basements, and original systems, while the township has more postwar suburban housing with slab or crawl-space foundations. The inspection is scoped to the specific home's age, foundation type, and systems, not to the municipality. Both are served from the same team.
Postwar housing in this area is now 50 to 70 years old and its original systems are failing together. Galvanized and early copper plumbing leaks at fittings behind walls, aluminum windows have lost their seals and condense in winter, bath fans often vent into the attic, and foundations have cycled through decades of freeze and thaw. Thermal imaging and moisture meters find hidden moisture in walls and attics that a visual check misses.
Yes, especially for historic downtown homes and for postwar houses with basements. The inspection covers thermal imaging for behind-wall moisture, basement and crawl-space readings, attic ventilation, and air or surface sampling where growth is suspected. A standard home inspection often notes a stain or smell and recommends a specialist. Independent documentation before closing protects you from inheriting a slow problem.
Our Plymouth, Michigan team covers both the city of Plymouth and Plymouth Township, with same-day and next-day appointments and 24/7 emergency response. Canton and Livonia each have their own 24H Mold Inspection page with a local team. If your property is in either city, start with that page. If you are not sure which page fits your address, call the number on this page and we will point you to the right team.
The inspection is the diagnosis. We map moisture with thermal imaging and meters, identify the source, and send samples to an accredited lab, then deliver a written report with the extent of growth, the cause, and a defined scope. The cleanup is done by a separate remediation contractor, because we perform inspection and testing only. Once the work is done, we can return for independent post-remediation verification.

Contact

Book your Plymouth mold inspection today

Tell us what's going on and we'll respond the same day

Location

24H Mold Inspection of Plymouth

Hours

  • MondayOpen 24 hours
  • TuesdayOpen 24 hours
  • WednesdayOpen 24 hours
  • ThursdayOpen 24 hours
  • Friday6 AM – 6 PM
  • SaturdayClosed
  • SundayOpen 24 hours

Service area neighborhoods

  • Plymouth
  • Plymouth Township
  • Canton Township (adjacent)
  • Northville (adjacent)
  • Livonia (adjacent)
  • Westland (adjacent)
Call For Service(734) 987-6441