24H Mold Inspection
Lakewood24/7 EMERGENCY(562) 724-9177
HomeOur ServicesLeak & Moisture Detection
our services

Leak & Moisture Detection

Hidden moisture is the root cause of most mold problems. We locate it precisely—without tearing into walls—so you can fix the source, not just the symptoms.

About

Why Moisture Detection Comes First

Mold needs moisture to grow, and moisture hides. We use non-destructive instruments to map water through walls, floors, and ceilings—and thermal cameras to see temperature anomalies that indicate active leaks or condensation—giving you a precise location before any repair work begins.

Moisture detection helps you:

  • —Pinpoint the exact source of a leak before demolition
  • —Map moisture spread behind walls and under flooring
  • —Identify condensation-prone areas before mold appears
  • —Confirm repairs were effective after water damage is addressed
Why Moisture Detection Comes First

Methodology

How We Detect Moisture

Non-destructive tools that locate water without cutting into your property.

We measure the moisture content of walls, floors, and ceilings using both pin-based and non-invasive pinless meters—mapping the full extent of saturation without surface damage.

Best for:

— Drywall, wood framing, and subfloor assessment
— Mapping moisture spread after a water event
— Establishing baseline readings for monitoring

Our thermal cameras detect temperature differentials across surfaces. Water-loaded materials hold heat differently than dry materials, making leaks and saturated zones visible behind finished walls.

Best for:

— Finding active leaks behind drywall without cutting
— Locating plumbing or roof leaks not yet surface-visible
— Identifying condensation zones that feed mold

Every finding is documented with photos, moisture readings, and thermal images. You receive a clear report so contractors, insurers, or property managers can act immediately.

Report includes:

— Moisture readings mapped by room and surface
— Thermal images with annotated anomaly locations
— Probable source identification and next steps

Mold inspector at work

Checklist

When Do You Need Moisture Detection?

Moisture detection is the right first step if:

  • —You smell mold or dampness but can't find the source
  • —You've had a plumbing leak, roof leak, or flood
  • —You're buying a property and want to verify no hidden moisture
  • —You had water damage and want to confirm the area is fully dry
  • —Recurring mold keeps coming back after surface cleaning

Moisture detection is often the fastest and most cost-effective way to scope a mold problem before committing to testing or remediation.

Detection Services

Our Detection Methods

Two complementary tools that together give a complete picture of moisture conditions in any building.

1Thermal Imaging

Infrared cameras reveal temperature anomalies that indicate hidden leaks, condensation zones, and moisture paths behind finished surfaces.

2Moisture Detection

Pin and pinless meters precisely measure moisture content in walls, floors, and ceilings—mapping the full extent of saturation without destructive investigation.

Mold inspection Lakewood FAQ

Call For An Inspection
Lakewood's roughly 17,000 homes went up between 1950 and 1954 using a small set of floor plans, so they share the same slab design, plumbing layout, roof framing, and original systems. That means they age together. Original galvanized or early copper supply lines, slab expansion joints, attic bath-fan ducting, and original HVAC are all reaching end of life across the whole city at the same time. For an inspection, it helps: the likely failure points are predictable. It also means a home that looks fine may be sitting on the same aging plumbing as every house on its block. Thermal imaging and moisture meters find in-wall and under-slab moisture that a visual check misses.
Slab construction hides moisture problems. A slow supply-line leak under the slab or inside a wall can wick upward into drywall and framing with no visible sign at floor level, and Southern California's mild climate lets that moisture support growth year-round. Common sources in Lakewood are corroded original supply lines, bath fans that vent into the attic rather than outdoors, slab expansion joints that admit ground moisture, and original roofing details that have been patched or replaced several times. The inspection maps moisture across walls and slab edges and checks the attic for condensation staining.
Often it does. Many Lakewood homes were extended long after construction with converted garages and rear additions. Those spaces may lack a vapor barrier, may be tied into the original HVAC without enough return air, and may have no moisture control at the slab. They also add occupants to a house ventilated for fewer. We treat an addition as its own space, checking slab moisture, the wall cavity at the seam between old and new construction, and the roof tie-in.
It can. Lots in the lower blocks nearest the flood-control channel sit closer to the regional water table than the city's higher interior, which keeps ground moisture elevated against slab edges through the wet season. It does not mean every home nearby has a problem. It means an inspection should record moisture at slab edges and along exterior walls, not only inside the living space, and compare homes near the channel against drier parts of the city.
Yes. Because the housing stock is so uniform, the age-related risks are predictable, and an inspection tells you which of them have already started on this particular house. It covers thermal imaging for behind-wall moisture, slab readings at expansion joints, attic ventilation and condensation, and air or surface sampling where growth is suspected. For condos and townhomes it also documents whether a moisture condition comes from a shared building system, which affects who pays. Independent documentation before closing protects you from inheriting a slow problem.
Our Lakewood team covers the whole city, including Mayfair, the original Lakewood Park tracts, the Lakewood Center area, and the neighborhoods along the San Gabriel River, with same-day and next-day appointments and 24/7 emergency response. Long Beach has its own 24H Mold Inspection page with a local team. If your property is in Long Beach, start with that page.
Inspection and testing only. In a city of near-identical 1950s homes, a company that also sells cleanup has a financial reason to find more than the instruments confirm. What you receive is the diagnosis: the extent of growth, the moisture source, lab-confirmed species, and a written scope you can take to several contractors for comparable bids.

Contact

Book your Lakewood mold inspection today

Tell us what's going on and we'll respond the same day

Location

24H Mold Inspection of Lakewood

Address

3950 Paramount Blvd #115, Lakewood, CA 90712

Hours

  • MondayOpen 24 hours
  • TuesdayOpen 24 hours
  • WednesdayOpen 24 hours
  • ThursdayOpen 24 hours
  • Friday6 AM – 6 PM
  • SaturdayClosed
  • SundayOpen 24 hours

Service area neighborhoods

  • Lakewood Park
  • Mayfair
  • Lakewood Mutuals
  • Cherry Cove
  • Lakewood Village
  • Carson Park
  • Country Club Estates
  • Del Amo Boulevard corridor
Call For Service(562) 724-9177