24H Mold Inspection
Sylmar24/7 EMERGENCY(747) 315-3530
HomeOur ServicesLeak & Moisture Detection
our services

Leak & Moisture Detection

Hidden moisture is the root cause of most mold problems. We locate it precisely—without tearing into walls—so you can fix the source, not just the symptoms.

About

Why Moisture Detection Comes First

Mold needs moisture to grow, and moisture hides. We use non-destructive instruments to map water through walls, floors, and ceilings—and thermal cameras to see temperature anomalies that indicate active leaks or condensation—giving you a precise location before any repair work begins.

Moisture detection helps you:

  • —Pinpoint the exact source of a leak before demolition
  • —Map moisture spread behind walls and under flooring
  • —Identify condensation-prone areas before mold appears
  • —Confirm repairs were effective after water damage is addressed
Why Moisture Detection Comes First

Methodology

How We Detect Moisture

Non-destructive tools that locate water without cutting into your property.

We measure the moisture content of walls, floors, and ceilings using both pin-based and non-invasive pinless meters—mapping the full extent of saturation without surface damage.

Best for:

— Drywall, wood framing, and subfloor assessment
— Mapping moisture spread after a water event
— Establishing baseline readings for monitoring

Our thermal cameras detect temperature differentials across surfaces. Water-loaded materials hold heat differently than dry materials, making leaks and saturated zones visible behind finished walls.

Best for:

— Finding active leaks behind drywall without cutting
— Locating plumbing or roof leaks not yet surface-visible
— Identifying condensation zones that feed mold

Every finding is documented with photos, moisture readings, and thermal images. You receive a clear report so contractors, insurers, or property managers can act immediately.

Report includes:

— Moisture readings mapped by room and surface
— Thermal images with annotated anomaly locations
— Probable source identification and next steps

Mold inspector at work

Checklist

When Do You Need Moisture Detection?

Moisture detection is the right first step if:

  • —You smell mold or dampness but can't find the source
  • —You've had a plumbing leak, roof leak, or flood
  • —You're buying a property and want to verify no hidden moisture
  • —You had water damage and want to confirm the area is fully dry
  • —Recurring mold keeps coming back after surface cleaning

Moisture detection is often the fastest and most cost-effective way to scope a mold problem before committing to testing or remediation.

Detection Services

Our Detection Methods

Two complementary tools that together give a complete picture of moisture conditions in any building.

1Thermal Imaging

Infrared cameras reveal temperature anomalies that indicate hidden leaks, condensation zones, and moisture paths behind finished surfaces.

2Moisture Detection

Pin and pinless meters precisely measure moisture content in walls, floors, and ceilings—mapping the full extent of saturation without destructive investigation.

Mold inspection Sylmar FAQ

Call For An Inspection
They can. Sylmar is in an earthquake-prone area, and shaking over the decades opens hairline cracks in foundations, chimneys, and stucco. Homes that received cosmetic repair may still have moisture pathways at those cracks, widened by years of wet and dry cycles. Inspections on older or previously repaired homes should assess foundation, chimney, and stucco wall moisture.
They can. The foothills around Sylmar have burned in past wildfires, and fire-affected soils can shed rather than absorb rain, sending more runoff toward foundations and slopes for years. Homes near burned hillsides should have slope drainage and foundation moisture assessed with that in mind.
Homes from the 1950s and 1960s are 60 to 70 years old, with corroded galvanized supply lines, slab expansion joints that admit ground moisture, and HVAC condensate drains failing. Cracks from past earthquakes add pathways that newer construction may not have. Thermal imaging and moisture meters find hidden moisture a visual check misses.
Moisture is a consistent finding in older flat-roofed buildings, where roof drains, parapet details, and rooftop HVAC condensate send water above suspended ceilings, often unseen for months. Inspections concentrate on those areas.
Yes. The inspection covers thermal imaging for behind-wall moisture, foundation and crack moisture pathways, attic and chimney condition, and slab readings. Independent documentation before closing protects you from inheriting a slow problem that cosmetic repairs covered up.
Our Sylmar team covers the whole community, including Carey Ranch, El Cariso, the Foothill Boulevard corridor, the Olive View area, Veterans Park, Lake View Terrace, and Mission Hills, with same-day and next-day appointments and 24/7 emergency response. If you are not sure which page fits your address, call the number on this page and we will point you to the right team.
The inspection is the diagnosis: moisture mapped, source identified, samples analyzed by a state-certified lab, and a written scope delivered. A separate contractor does any cleanup, because we perform inspection and testing only. We can return for independent verification afterward.

Contact

Book your Sylmar mold inspection today

Tell us what's going on and we'll respond the same day

Location

24H Mold Inspection of Sylmar

Hours

  • MondayOpen 24 hours
  • TuesdayOpen 24 hours
  • WednesdayOpen 24 hours
  • ThursdayOpen 24 hours
  • Friday6 AM – 6 PM
  • SaturdayClosed
  • SundayOpen 24 hours

Service area neighborhoods

  • Lake View Terrace adjacent area
  • Hubbard Street corridor
  • Foothill Boulevard district
  • Mission Hills border area
  • Carey Ranch
  • El Cariso area
  • Olive View vicinity
  • Veterans Park district
Call For Service(747) 315-3530