24H Mold Inspection
Inglewood24/7 EMERGENCY(310) 758-3808
HomeOur ServicesMold InspectionThermal Imaging
Mold Inspection

Thermal Imaging

Infrared cameras find hidden mold conditions and water damage before any surface stain shows up.

Overview

Why infrared thermal imaging finds mold others miss

Mold doesn't always announce itself. A small leak inside a wall, a stretch of failed insulation, or a cold-bridge condensation zone can build mold-friendly conditions for months before any stain reaches the surface. Thermal imaging reveals those conditions while they're still hidden, giving you a chance to address the moisture before mold has spread.

Thermal imaging detects:

  • Hidden moisture inside walls, ceilings, and under floors
  • Active leaks from plumbing, roofing, or HVAC components
  • Insulation gaps and ventilation defects driving condensation
  • Cold spots creating ideal future conditions for mold growth
Why infrared thermal imaging finds mold others miss
Mold inspector at work

Benefits

What you get from thermal imaging

Find hidden risks early without damaging the property

  • Non-invasive: No drilling, no cutting, no surface damage.
  • Early detection: Catches problems before damage becomes visible.
  • Cost-effective: Targets repairs only where they're needed.
  • Documented findings: Annotated thermal images included in the report.

About

How thermal imaging mold inspection works

Our certified mold inspectors use FLIR cameras to read temperature differentials across surfaces. Cooler areas often signal water present in the material, even when no surface damage has appeared.

Our process includes:

  • A complete thermal scan of key interior and exterior surfaces
  • Identification of unusual cold or warm patterns in the readings
  • Cross-checking thermal findings with calibrated moisture meters
  • A mold inspection report including the annotated thermal images
How thermal imaging mold inspection works

Mold inspection Inglewood FAQ

Call For An Inspection
No. 24H Mold Inspection of Inglewood inspects and tests only, and we never perform remediation or removal — that separation is deliberate. A large share of this city's housing is pre-war and post-war single-family stock on raised foundations, much of it now rental, and thousands of those homes went through airport-funded sound insulation: sealed dual-pane windows, added wall and attic insulation, and closed-up penetrations that eliminated the air exchange a leaky old house used to get for free. In a building sealed that tight, moisture that gets in has nowhere to go, and the visible patch is rarely the extent of it. A company that bills for the cleanup has a financial reason to keep finding more of it. What we produce is the diagnosis — what is growing, which moisture source feeds it, how far it runs behind finished surfaces, and lab confirmation of the samples. You take that report to remediation contractors and collect comparable bids on a defined scope instead of a walkthrough guess. When the work is done we return for independent verification, which carries weight with insurers and landlords precisely because we had no part in the removal.
Our coverage runs across Inglewood and the unincorporated pockets folded into it. Inside the city that means Fairview Heights, downtown Inglewood, Morningside Park, Century Heights, and Arbor Village, plus the adjacent communities we work as one area: Lennox, Ladera Heights, and Hyde Park. Lennox and Ladera Heights have no city hall of their own and no separate 24H page, so both are dispatched from here. Several neighbors do have their own 24H Mold Inspection page written around that area's housing stock — Los Angeles, Gardena, Torrance, Carson, Compton, Lynwood, South Gate, Manhattan Beach, and Redondo Beach — so if your property sits in one of those, start there. Because this is all one dispatch area, same-day appointments are realistic, and an active leak, a failed supply line, or standing water after a storm is answered 24/7. If you are not sure which page covers your address, call the number on this page — the ZIP boundaries here do not follow the city limits.
No, and the distinction is worth being blunt about: we are mold inspectors, not general home inspectors. A home inspection is a broad condition survey — roof, electrical, plumbing, appliances, structure — and most contracts exclude mold outright, so its mold coverage stops at whatever is visible in accessible areas. A mold inspection is narrow and instrument-driven: moisture meters at wall bases and slab edges, thermal imaging over suspect assemblies, crawl space and attic entry, and lab-analyzed samples when the walk-through justifies them. In Inglewood that gap runs wider than usual for one specific reason. Houses retrofitted under the airport sound insulation program are sealed far tighter than they were built to be, so interior humidity that once leaked away now condenses on the coldest surface in the room instead. None of that is visible in a condition survey. Most buyers here do both: a licensed home inspector for overall condition, then a mold inspection when that report notes staining, odor, prior water damage, or a crawl space nobody entered.
Because there is water under this city that has nothing to do with rainfall. The springs that named the old Rancho Aguaje de la Centinela still surface in Edward Vincent Jr. Park — free-flowing groundwater in the middle of a built-out city — and the creek that once carried them off was channelized long ago, which moved the surface water without lowering what sits beneath it. When SoFi Stadium was built on the old Hollywood Park site, the bowl had to be dug roughly a hundred feet into the ground to keep its roofline beneath the airport's flight-path height limits, an excavation running well below the surrounding grade. For houses, shallow groundwater shows up as crawl space humidity that never drops, white efflorescence blooming along the base of foundation walls, and slab edges that read wet on a meter in September. An intact vapor barrier and clear foundation vents matter more here than the rain gauge does. If your crawl space smells earthy in dry weather, that is the mechanism to check first.
Yes, Lennox is covered from here, and it has no 24H page of its own because it has no city of its own. It is an unincorporated island of Los Angeles County, roughly a square mile with its own ZIP, sitting directly below the airport's south runways. Two things make it distinct on an inspection. First, it is one of the most densely built square miles in the region — houses from the 1920s through the 1950s added onto repeatedly, split into units, and backfilled with rear structures, on lots whose drainage was never designed for that much roof and paving. Water leaves those lots slowly, and it leaves them against foundations. Second, jurisdiction: permits, code enforcement, and habitability complaints route to the county rather than to a city hall, so owners and tenants regularly lose weeks contacting the wrong agency. Get the moisture source documented independently before you file anything — a county inspector records a condition, not where the water came from or how far it has traveled.
Measurement settles it, not argument. Inglewood is majority-renter, and the city adopted its own rent stabilization and just-cause ordinance in 2019 as redevelopment around the stadium pushed rents upward, so habitability disputes here carry more weight than they used to and both sides have reason to want a defensible record. The claim that a tenant showers too long and the claim that a supply line is weeping inside the wall behind that shower produce the same stain, and nobody settles that by looking at it. What settles it is moisture readings at the wall base and behind the enclosure, thermal imaging across the plumbing wall, indoor humidity logged against outdoor conditions the same day, and lab-analyzed samples. It matters more in the sound-insulated houses, where sealed windows and added insulation mean ordinary household humidity genuinely can condense on a cold wall — so both explanations can be partly true, and only instruments separate them. Because we never perform the remediation, neither side can argue the findings were written to sell a cleanup.
Fresh finishes are the hard case, because everything that would normally show you where water has been is now behind new material. Inglewood has drawn heavy investor purchasing since the stadium and arena projects broke ground, and much of what trades here now has been through a fast cosmetic renovation: new flooring, new paint, recessed lighting, a re-tiled bathroom. The pre-war and post-war stock those flips start from carries raised foundations, seventy-year-old galvanized supply lines, and cast-iron drains at the end of their service life, and a cosmetic remodel rarely touches any of it. So the inspection goes where the finishes did not. The crawl space, for standing water, a torn or missing vapor barrier, and pipe repairs made without opening walls. The attic, for whether the bath and dryer vents actually terminate outside. Moisture readings at wall bases and around new tile. If the seller cannot produce permits for the plumbing or electrical work, treat that as your starting point for what else got skipped.

Contact

Book your Inglewood mold inspection today

Tell us what's going on and we'll respond the same day

Location

24H Mold Inspection of Inglewood

Service area neighborhoods

  • Morningside Park
  • Lennox
  • Hyde Park (adjacent)
  • Inglewood downtown
  • Century Heights
  • Arbor Village
  • Ladera Heights (adjacent)
  • Fairview Heights
Call For Service(310) 758-3808