24H Mold Inspection
Burbank24/7 EMERGENCY(747) 667-4230
HomeOur ServicesMold TestingAir Testing
Mold Testing

Air Testing

Mold air testing detects airborne spores and assesses indoor air quality, even in spaces where no visible contamination has shown up yet.

Overview

Why mold air testing matters

Most mold is invisible. Spores float undetected through ducts and doorways, spreading from room to room with the air itself. Air testing reveals the species and concentration of what's airborne, even when no visible growth is found on any surface.

Mold air testing detects:

  • —Invisible mold spores circulating through the air
  • —Differences in spore levels from one room to the next
  • —Contamination inside HVAC systems and hard-to-reach areas
  • —Early warning signs in rooms that appear unaffected
Why mold air testing matters
Mold inspector at work

Benefits

What you get from air testing

Understand the air quality and find what your eyes can't

  • —Non-invasive: No drilling, no surface damage, no demolition needed.
  • —Early detection: Catch contamination before it spreads or symptoms start.
  • —Data-driven: Measure and compare spore counts room by room with lab-verified results.
  • —Defensible documentation: State-certified lab results that hold up for insurance and real estate use.

About

How mold air testing works

Our certified mold inspectors use calibrated sampling pumps to draw air through a spore trap cassette, capturing airborne mold spores. The lab identifies the mold species under a microscope, including any HVAC contamination if the system is implicated.

Our process includes:

  • —Targeted sampling in problem areas and comparison sampling outdoors
  • —Spore traps or impactor cassettes calibrated for accurate collection
  • —Lab-verified results identifying species and spore counts
  • —A written mold inspection report with the numbers and next steps
How mold air testing works

Mold inspection Burbank FAQ

Call For An Inspection
The Chandler Boulevard corridor and the Media District's 1960s and 1970s apartment stock is now 50 to 60 years old, and original building systems are failing in patterns across a large number of units simultaneously. In stacked apartment construction, a moisture source on one floor — a failed roof section, a plumbing stack leak, a window seal failure — travels through shared wall assemblies and appears in units below months after the source event. Original HVAC systems deposit condensate inside air handler cabinets and adjacent wall cavities when drain lines fail. Original single-pane windows condense heavily through San Fernando Valley winters, directing moisture into wall assemblies continuously. For property managers and landlords, a building-level assessment that documents which systems are contributing to moisture conditions is more useful than a single-unit inspection.
A habitability mold inspection documents the moisture and mold condition of a rental unit in a form that satisfies California's implied warranty of habitability under Civil Code 1941. In Burbank's dense rental market — the Chandler corridor, the Media District, and the older neighborhoods south of the 134 — tenants frequently report musty odors, visible staining, or respiratory symptoms that landlords dispute. An independent inspection with lab-verified findings documents what was found, where, and what the probable moisture source is. Because 24H Mold Inspection performs no remediation, the findings carry no financial interest in directing the repair to any particular scope — which is what makes the report credible to both parties and useful in a dispute with Burbank's code enforcement or housing department.
The Burbank Hills above the 134 carry hillside construction from the 1950s through 1980s where slope runoff concentrates at downslope foundations and retaining walls that are now 40 to 70 years old. The 1994 Northridge earthquake opened foundation cracks and retaining wall failures throughout the San Fernando Valley — properties in the Burbank Hills that weren't fully assessed after 1994 may have moisture pathways active for over 30 years. Cold air pools in the canyon terrain at night, driving condensation on interior surfaces in below-grade rooms that above-grade living areas don't experience. Custom homes on large hillside lots also tend to have outbuildings and detached structures that accumulate moisture independently of the main residence.
In the original residential neighborhoods around Olive Avenue and in the Media District's older apartment stock, it's one of the more consistent findings. Old Town Burbank's Craftsman and Bungalow homes from the 1910s and 1920s carry original or early-replacement galvanized plumbing developing slow behind-wall leaks and crawl spaces that predate modern vapor management. The 1987 Whittier Narrows earthquake caused widespread chimney and foundation cracking throughout the Valley that has been admitting moisture in properties never fully assessed. Media District apartment buildings carry the stacked-construction moisture migration pathways where a failure on one floor surfaces in the unit below months later.
Pre-purchase inspection in Burbank is worth doing across all neighborhoods given the housing age range. For Old Town and the older residential blocks, the crawl space, original plumbing condition, and earthquake-related foundation cracking are the primary concerns. For hillside Burbank Hills properties, the retaining wall drainage and below-grade levels matter most. For the apartment corridors, the building-system investigation is more important than the individual unit walkthrough. In Burbank's active real estate market, having independent moisture documentation before closing protects you from inheriting a long-running problem that wasn't visible during a standard showing.
Our Burbank team covers all of Burbank — Old Town, the Media District, Magnolia Park, the Chandler corridor, and the Burbank Hills — with same-day and next-day appointments and 24/7 emergency response. Several neighboring cities have their own dedicated 24H Mold Inspection pages: Glendale and Los Angeles each have separate coverage with their own local teams. Toluca Lake is served from the Burbank team. If your property is in Glendale, that page will have the most relevant local information.
Inspection and testing only. In Burbank's rental market, where landlords and tenants often have conflicting accounts of a moisture condition's extent and source, the company performing the inspection needs to have no financial interest in the cleanup work. What you receive is the diagnosis: extent of growth, moisture source, lab-confirmed species, and a written scope you can use to get comparable bids from multiple remediation contractors on the same defined terms.

Contact

Book your Burbank mold inspection today

Tell us what's going on and we'll respond the same day

Location

24H Mold Inspection of Burbank

Hours

  • MondayOpen 24 hours
  • TuesdayOpen 24 hours
  • WednesdayOpen 24 hours
  • ThursdayOpen 24 hours
  • Friday6 AM – 6 PM
  • SaturdayClosed
  • SundayOpen 24 hours

Service area neighborhoods

  • Magnolia Park
  • Chandler Park
  • Downtown Burbank
  • Rancho District
  • Burbank Hills
  • West Burbank
  • Toluca Lake (adjacent)
  • North Hollywood (adjacent)
Call For Service(747) 667-4230